Ethernet Interface; Supply Voltage - B&R 4PP065.0571-B00 Technical Documentation Manual

Fully assembled device - Technical data

3.2.3 Ethernet interface

Interface
Ethernet interface
1
RJ45 twisted pair socket
(10BaseT/100BaseT)

3.2.4 Supply voltage

The pinout can be found either in the following table or printed on the back of the Power Panel. The Power Panel
has reverse polarity protection that prevents the supply voltage from being connected incorrectly and damaging
the device. Overload protection must be provided by an external fuse (5 A, fast-acting).
Supply voltage
3-pin multipoint plug
Caution!
The functional ground must be connected to ground (e.g. control cabinet) using the shortest possible
path. Using the largest possible conductor cross section on the supply plug is recommended.
10
Terminal
1 RXD
2 RXD\
3 TXD
4 Termination
5 Termination
6 TXD\
7 Termination
8 Termination
Table 10: 4PP065.0571-X74F - Ethernet interface pinout
Terminal Assignment
+ 24 VDC
Functional ground
GND
Required accessories
0TB103.9 Connector, 24 VDC, 3-pin female, 3.31 mm² screw clamp, protected against vibration
by the screw flange
0TB103.91 Connector, 24 VDC, 3-pin female, 3.31 mm² cage clamp, protected against vibration by
the screw flange
Table 11: 4PP065.0571-X74F - Supply voltage pinout
Pinout
Receive signal
Receive signal inverted
Transmit signal
Termination
Termination
Transmit signal inverted
Termination
Termination
Pinout
Data sheetV 1.00 4PP065.0571-B00