Location And Function Of Parts And Controls; Rollabout Processor - Sony PCS-3000 Operating Instructions Manual

Location and Function of Parts and Controls

Rollabout Processor

Front
1 6 Card eject button
1 6 Card eject button
This button cannot be used with this system.
2 STANDBY lamp (orange)
When you press the POWER switch
flashes until the Rollabout Processor goes into
standby. Once in standby, the lamp stays on.
3 POWER lamp (green)
This lamp lights up when the system is turned on.
Pressing the POWER switch
Processor does not turn the system on.
4 BUSY lamp (yellow)
This lamp cannot be used with this system.
5 Card slot
This slot cannot be used with this system.
STANDBY
6
Rollabout Processor (front)
6
, this lamp
6 of the Rollabout
2 STANDBY lamp
3 POWER lamp
POWER
BUSY
4 BUSY lamp
5 Card slot
6 POWER switch
6 POWER switch
Turns on/off main power of the Rollabout Processor.
The STANDBY lamp lights up when the Rollabout
Processor is in standby.
Normal operation requires the unit to be left in standby
at all times.
When turning on the power, press the POWER ON
button on the Remote Commander.
A-1
Appendix