Setting The Answer Mode - Sony PCS-3000 Operating Instructions Manual

Setting the Answer Mode

To change the answer mode to manual
The answer mode setting determines how the system responds to incoming
calls. It can be set to one of the following:
• AUTO
Your system receives the call and starts the system automatically. Your
party will be displayed on the remote party's monitor.
• MANUAL
Incoming calls are not connected. You must manually connect the call
before it appears on screen.
This is useful in situations when you are not ready to start the meeting.
The factory setting is AUTO. To change the answer mode setting, follow
the steps below.
1
Select [OTHER] from the MAIN menu.
The OTHER sub-menu appears.
INPUT MULTI
QUICK
DIAL
2
Select [SETUP].
The SETUP menu appears.
SETUP
ANSWER MODE
BRI RATE
V.35 PORT
T.120/H.281
FAR END CTRL
LIP SYNCH
SIRCS OUTPUT
LANGUAGE
SETUP
STATUS
DTMF
T.120
DIAL LIST
MANUAL DIAL
P in P CAMERA SEND AUDIO OTHER
[OTHER]
AUTO
AUTO
SINGLE
OFF
SORT DIAL LIST
ON
OFF CAM BRIGHT
1 PERIPHERAL
ENGLISH LDN
END OF
MEETING
EXIT
(Continued)
2-9
Chapter 2 Settings