Resuming Operation After Storing The Motion Controller; Symbol For The New Eu Battery Directive - Mitsubishi Electric Q Series User Manual

6 INSPECTION AND MAINTENANCE

6.5.3 Resuming operation after storing the Motion controller

6.5.4 Symbol for the new EU Battery Directive

When the operation is to be resumed after being stored with the battery removed or
the battery has gone flat during storage, the contents for the data (Refer to Section
6.5) of RAM built-in Motion controller cannot be guaranteed.
Before resuming operation, write the contents for the data backed up prior to storage to
RAM built-in Motion controller.
POINT
Before storing the Motion controller, always back up the contents for the data to
RAM built-in Motion controller.
This section describes a symbol for the new EU Battery Directive (2006/66/EC) that is
labeled batteries.
This symbol mark is according to the directive 2006/66/EC Article 20 Information for
end-users and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality
materials and components which can be recycled and/or reused.
This symbol means that batteries and accumulators, at their end-of-life, should be
disposed of separately from your household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical symbol
means that the battery or accumulator contains a heavy metal at a certain
concentration. This will be indicated as follows:
Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%)
In the European Union there are separate collection systems for used batteries and
accumulators.
Please, dispose of batteries and accumulators correctly at your local community waste
collection/recycling centre.
Please, help us to conserve the environment we live in!
Note: This symbol mark is for EU countries only.
6 - 12