Mitsubishi Electric Q Series User Manual page 122

4 INSTALLATION AND WIRING
Connect the battery lead connector
to the battery connector for Motion
controller.
Secure the connector beneath the
battery disconnection prevention
hook.
Neatly place the lead wires into the
battery holder.
Adjust the battery holder to the
installation grooves, and slide the
battery holder in the direction of
the arrow, taking care to not
damage the lead wires.
(Be sure to insert it until it clicks.)
Make sure that the battery holder
is installed in the Motion controller
securely.
END
(2) Battery holder (For Q6BAT)
(a) Mounting
1)
2)
3)
Motion
controller
2)
3)
Push
4 - 13
Battery connector
1)
(Q170MCPU side)
Battery lead
connector
(Battery side)
Battery disconnection
prevention hook
Battery holder
Installation grooves
Battery holder