Mitsubishi Electric Q Series User Manual page 205

APPENDICES
2) Communication setting in MT Developer2 side
Set the items on the Transfer Setup screen in MT Developer2 as shown
below.
b)
c)
a) Select [Ethernet Board] for PC side I/F.
b) Select [PLC Module] for CPU side I/F.
Select the "Connection via HUB" on the CPU side I/F Detailed
Setting of PLC Module screen, and set the Motion controller IP
address.
c) Make the setting for Other Station Setting.
APP - 12
a)
Select the "Connection
via HUB"
Set the Motion controller
IP address