Extension Base Unit And Extension Cable - Mitsubishi Electric Q Series User Manual

2 SYSTEM CONFIGURATION

2.5.2. Extension base unit and extension cable

Type
Item
Cable length[m(ft.)]
Application
Mass [kg]
This section describes the specifications of the extension cables for the base units
(Extension base unit), and the specification standards of the extension base unit.
5VDC internal current consumption of base unit might be changed. Be sure to refer to
the MELSEC-Q series PLC Manuals.
(1) Extension base unit specifications
Type
Item
Number of I/O modules
Possibility of extension
Applicable module
5VDC internal current
consumption [A]
Fixing hole size
Exterior dimensions
[mm(inch)]
Mass [kg]
Attachment
(2) Extension cable specifications
The list below describes the specifications of the extension cables which can
be used.
QC05B QC06B
0.45(1.48) 0.6(1.97)
Connection between the Motion controller and extension base unit
0.15 0.16
POINT
Use the extension cable of 10m (32.8ft.) or less.
Q52B
2
Q series modules
0.08
M4 screw hole or
106(W) 98(H) 44.1(D)
(4.17(W) 3.86(H) 1.74(D) )
0.14
Fixing screw M4 14 4 pieces
QC12B QC30B
1.2(3.94) 3.0(9.84)
0.22
2 - 41
Q55B
5
Extendable
0.10
4.5 hole (for M4 screw)
189(W) 98(H)
(7.44(W) 3.86(H)
0.23
QC50B
5.0(16.40)
0.40 0.60
44.1(D)
1.74(D) )
QC100B
10.0(32.81)
1.11