Resuming Operation After Storing The Motion Controller; Symbol For The New Eu Battery Directive - Mitsubishi Electric MR-MQ100 User Manual

6 INSPECTION AND MAINTENANCE

6.5.3 Resuming operation after storing the Motion controller

6.5.4 Symbol for the new EU Battery Directive

When operation is to be resumed after the Motion controller has been in storage with
the battery removed or if the battery has died during storage, the contents of
programs, parameters, absolute position data and latch data cannot be guaranteed.
Before resuming operation, write the contents of programs, parameters, absolute
position data and latch data which were backed-up to the motion controller's SRAM
prior to storage.
POINT
Before placing the motion controller into storage, always back up the contents of
programs, parameters, absolute position data and latch data to the Motion
controller's SRAM.
This section describes a symbol for the new EU Battery Directive (2006/66/EC) that
is labeled batteries.
Note: This symbol mark is for EU countries only
This symbol mark is according to the directive 2006/66/EC Article 20 Information for
end-users and Annex II.
Your MITSUBISHI ELECTRIC product is designed and manufactured with high
quality materials and components which can be recycled and/or reused.
This symbol means that batteries and accumulators, at their end-of-life, should be
disposed of separately from your household waste.
If a chemical symbol is printed beneath the symbol shown above, this chemical
symbol means that the battery or accumulator contains a heavy metal at a certain
concentration.
This will be indicated as follows:
Hg: mercury (0.0005%), Cd: cadmium (0.002%), Pb: lead (0.004%)
In the European Union there are separate collection systems for used batteries and
accumulators.
Please, dispose of batteries and accumulators correctly at your local community
waste collection/recycling centre.
Please, help us to conserve the environment we live in!
6 - 11