Siemens TXP-CLC Manual page 199

To be able to program the memory card this file must be put on the PG 740 via a
floppy disk. To accomplish this proceed as follows:
• Open a UNIX shell (click on the desktop with the right mouse button, and
select X Terminal as shown below).
• Type 'cd listen/as/agxxxx/transfer' then enter (agxxxx will be the number
of the AP you are working with i.e ag0001 in this case). After you hit enter
you will come back to the prompt. Now type 'ls –l' to observe the filename
you want to transfer to the floppy disk. An example is shown below:
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
Training Center
TXP CLC Course
12
11