Siemens TXP-CLC Manual page 190

TXP CLC Course
If there are errors they can be found in the protocol file named HW_GEN. To
view or print this file go back to the main ES 680 menu and click on Edit, then
View/Print then code generating, then the agxxxx where xxxx = the AP number
i.e ag0001. Now choose log and Locate the protocol file with the correct time and
date in this directory and click on it (note it will start HW_GEN). To view the file
click on view or print whichever is desired. The menu sequence is shown below:
2 Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.