Distributed Control System - Siemens TXP-CLC Manual

Distributed Control System

External network
External network
Bridge Gateway
Bridge Gateway
Terminal Terminal bus bus
Plant Plant bus bus
Basic
Basic
Automation Automation
system system
These are the main parts of the TXP System and their interconnections.
•
The connections are done via the Terminal and Plant buses.
•
The Plant bus is connected to the AS and OM systems. The Terminal bus
is connected to the Man-Machine Interface and to the Processing and
Storing Data Units of the OM system.
•
The ES 680 and DS 670 need to be connected to both buses.
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
Operation and Management
system OM 650
Process operation
Process operation
Process information Process information
Process management Process management
AS 620 B
AS 620 B
Training Center
TXP-CLC Course
Engineering system Diagnostics system
ES 680
I&C fault
Engineering I&C fault
Engineering
Commissioning Commissioning
Maintenance Maintenance
SIMATIC S5
SIMATIC S5
1
DS 670
analysis
analysis
3