Fb163 Motventr (Control Motor/Solenoid Valve) - Siemens TXP-CLC Manual

TXP
SIM Function Block

FB163 MOTVENTR (Control Motor/Solenoid Valve)

Application
The drive control for motors or solenoid valves can be carried out in the TXP AS
620 B system using the DCM function block FB163 in conjunction with the signal
modules (SIM) in the ET 200M I/O device.
The following input and output signals can be configured for the connection of a
motor or solenoid valve:
RME: Feed-back message ON/OPEN
RMA: Feed-back message OFF/CLOSED
SAG: Switchgear fault
ANB: Feeder not ready (not racked in)
DE AUF: Torque Open
DE ZU: Torque Closed
MTU: Motor Temperature Monitoring (Motor Operated Valve Only)
ALE: Output ON/OPEN
ALA: Output OFF/CLOSED
KV: Contact power supply
These signals can be input with the voltages +24 VDC, +115 VDC, 115 VAC,
+230 VDC and 230 VAC (depending on the module used) and output with the
voltages +24 VDC, 115 VAC and 230 VAC.
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
Training Center
TXP CLC Course
11
1