Transfer Procedures - Siemens TXP-CLC Manual

TXP CLC Course

Transfer Procedures

The AP should be in run mode before a code transfer is attempted. This is
indicated by a steady green run light on the master and a flashing green run light
on the standby processor.
LAN code needs to be downloaded to the new CP. To accomplish this proceed
as follows:
From the main ES 680 menu click on Transfer then LAN then AP as below:
The following menu will appear:
Type in the desired AP number and a protocol file name (for later perusal), then
click on OK. When the process is complete a pop-up window will appear stating
that the down load is complete. You will need to acknowledge this message by
clicking on the close button in the pop-up window.
16 Training Center
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.