Identification Of Mounting Location Example; Identification Of Mounting Location - Siemens TXP-CLC Manual

Identification of Mounting Location Example

In Figure 3 an example of a KKS structure for identification of mounting location
is shown. The prefix "+" is used to represent mounting location information. The
"." between CJP02 and DC015 is used to identify that DC015 is a module
location within the cabinet CJP02. This identifier is used in the I&C manuals.
Figure 3 - Identification of Mounting Location
4
4
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.

Identification of Mounting Location

+ 11 UBA01 CJP02 . DC015
Unit 11
Mounting Location Identifier
Training Center
Module location
Tier = DC
Slot = 015
Cabinet Number
TXP Cabinet 2
Location
Electrical Container 1
TXP CLC Course