Siemens TXP-CLC Manual page 209

TXP CLC Course
If any hardware modifications have been made, the system automatically starts
the corresponding incremental generation. This means that it is not necessary to
start the hardware generator manually and only changes to the code will be
generated and transferred. Selecting to start the online handler is optional.
Starting the online handler means the online transfer can be started in the event
there are no errors in the generated code. Otherwise the code can be
downloaded at a later time.
Select Load to start the online handler and transfer the code.
12
If you select Close the generated code will be stored and can be transferred
later either offline or online.
Training Center 21
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.