Feed-Back Contact Switchgear (Rms); Command Output Response In Case Of A Fault (Vbaf); Man/Auto Changeover (Maus); Tag--Out Changeover (Tous) - Siemens TXP-CLC Manual

Feed-back contact switchgear (RMS)

Name: RMS
Function: Defines whether the "SAG" feed-back message of the blown fuse in the
switchgear can be detected, and with which type of switch. Additionally it is
determined here whether the TAG-OUT function (SP/BFLO) and operating
modes other than semiautomatic can be used.
Range of values:
Basic setting:
Meaning:
Feed-back contact
Detection using NC contact
Detection using NO contact
Detection using NC contact
Detection using NO contact
Default setting: 1

Command output response in case of a fault (VBAF)

Name: VBAF
Function: Defines the response of the command outputs in the event of a fault. If
the parameter is activated the command outputs ALE and ALA will not be
deactivated when the following faults occur: Status discrepancy; Feedback error;
and / or Switchgear faulty. Can only be activated by enabling TAG-OUT via
parameter RMS.
Range of values:
Basic setting:

MAN/AUTO changeover (MAUS)

Name: MAUS
Function: Defines whether the MAN/AUTO button in the operation window is
operable. Can only be activated by enabling TAG-OUT via parameter RMS.
Range of values:
Basic setting:

TAG--OUT changeover (TOUS)

Name: TOUS
Function: Defines whether the TAG--OUT button in the operation window is
operable. Can only be activated by enabling TAG-OUT via parameter RMS.
Range of values:
Basic setting:
16
Copying of this document, and giving it to others and use or communication of the contents, are forbidden without express authority. Offenders are liable to the payment of
damages. All rights are reserved in the event of the grant of a patent or the registration of a utility model or design.
NO--Cont. / Tag--Out no
NC--Cont. / Tag--Out no
NO--Cont. / Tag--Out yes
NC--Cont. / Tag--Out yes
NO--Cont. / Tag--Out no
Not activated / activated
Not activated.
Not activated / activated
activated.
Not activated / activated
activated.
Training Center
& TAG-OUT active
No
No
Yes
Yes
TXP CLC Course
⇒ RMS
0
1
2
3