To Scan An Original, While Enhancing Black - Toshiba e-STUDIO2010AC Imaging Manual

5.Scanning-specific Adjustments
5.6

To Scan an Original, while Enhancing Black

Before adjustment
Scan
Black is not dark enough, compared to the
original.
 Explanation
When a full-color original is scanned, black is not dark enough, compared to the original. (In general, the
scanned-in image is likely to become less dark.) Finely adjust the black density of the scanned-in image,
in order to darken black and closely match it with the original hue.
• This adjustment will have an effect only on the image scanned in the Full color mode (including the
Auto Color mode).
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
After adjustment
Black is enhanced and closely matched
with the original hue.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
5-14
Scan