To Program Frequently Used Copy Settings (To Use Custom Mode); To Adjust User Custom Mode Settings In Black Mode - Toshiba e-STUDIO2010AC Imaging Manual

2.Copier-specific Adjustments
2.19 To Program Frequently Used Copy Settings (To use
Custom Mode)
 Explanation
Five original modes (Text/Photo, Text, Printed Image, Photo and Map) are available for the color modes
and four original modes (Text/Photo, Text, Photo and Image Smoothing) are available for the black mode
by default. However, a new original mode adjusted to be able to satisfy the user's particular requests
about image quality can be added as a "User Custom" mode. One custom mode can be added for each
of the color and black modes. For users who frequently use the special type of originals or who are not
satisfied with the image quality of the existing original modes, it is recommended to register a set of copy
settings that satisfy the user's particular requests as the User Custom mode. However, "Photo" and
"Image Smoothing" cannot be selected for the "User Custom" mode.
• In the User Custom mode, one of the original modes set by default is selected as a base (reference)
original mode. Adjustments required for the intended purpose must be performed based on the
selected mode.
It is also available to use the User Custom mode as an independent original mode. This means that
the change of the setting values in the User Custom mode does not affect each default original modes.
 Procedures
The adjustment procedure differs depending on whether in the black mode or the full color mode the
settings in the User Custom mode are adjusted. Refer to the procedure corresponding to the user's
particular request.
2.19.1

To Adjust User Custom Mode Settings in Black Mode

• Perform the adjustment in accordance with the procedures below.
• Only the service technician must perform procedures (1) and (2).
• Both the service technician and the user perform use procedure (3).
(1) Select [08 SETTING MODE]. Change the value for the code [7034] to enable the functions of the
User Custom mode in the black mode.
Value for 08-7034
0
1
2
After setting the value, perform the next procedure.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
User Custom mode for black mode
Unused
Used (Text/Photo base)
Used (Text base)
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-80