Toshiba e-STUDIO2010AC Imaging Manual page 326

5.Scanning-specific Adjustments
Color Sub
[05] Code
mode code
05-8371 -
05-8372 -
05-8373 -
05-8375 -
Full
color
05-8380 -
05-8381 -
05-8412 -
05-8422 -
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Acceptable
Adjustment value
range
Fine adjustment
0 to 4
of black density
RGB conversion
0 to 3
method selection
Saturation
adjustment
Sharpness
adjustment
0 to 255
Density
adjustment
(Manual
adjustment
(Center value))
Automatic
density
adjustment
ADF noise
reduction level 0 to 200
setting
Contrast
0 to 255
adjustment
5-20
Default Setting value
The larger the value, the
0 darker the black side of
the image becomes.
Sets the color space
format of the output
image.
0 0: sRGB
1: AppleRGB
2: ROMMRGB
3: AdobeRGB
The larger the value, the
brighter the image
becomes.
The smaller the value,
the duller the image
becomes.
The larger the value, the
sharper the image
becomes.
The smaller the value,
the softer the image
128 becomes and the less
moire appears.
The larger the value, the
darker the image at the
center value becomes.
When a larger value is
set, printing density
becomes darker.
When the value
decreases, the effect of
reducing streaks (set
with 08-8300) becomes
larger. When the value
100
increases, the effect of
reducing streaks (set
with 08-8300) becomes
smaller.
When a larger value is
set, the contrast
becomes higher. When
128
a smaller value is set, it
becomes lower.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Reference
section
5.6
-
-
5.5
-
-
5.11
-