Toshiba e-STUDIO2010AC Imaging Manual page 46

1.General Adjustments – Copying, Printing and e-Filing (Output from Box)
Move the fuser unit guide rail upward
Front side
Rear side
The reproduction ratio in the secondary
scanning direction on the front side
becomes large.
Adjustment of tilted images on the leading/trailing edge
• Example of phenomenon
The image on the leading and trailing edges is tilted as shown below in the simplex mode.
Front side
Rear side
When this tilted image is printed in the duplex mode, image positions on the front and back sides
become as shown below.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Move the fuser unit guide rail downward
Front side
Rear side
The reproduction ratio in the secondary
scanning direction on the front side
becomes small.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
1-34
Before
adjustment
After
adjustment
Front side
Back side