To Print A Full-Color Original In Two Colors - Toshiba e-STUDIO2010AC Imaging Manual

3.12

To Print a Full-Color Original in Two Colors

Before adjustment
The original is printed in the Full color mode.
 Explanation
Select the twin color print mode option, in order to change colored text and lines on full-color original and
print out the original.
• The gradation reproduction for twin-color print can be switched by means of the following self-
diagnostic code.
Enter [05 ADJUSTMENT MODE] and change the setting value for the code [8002].
[05] Code Setting value
0
8002
1
• The Twin Color mode is not available when 1200 dpi is selected for the PS printer driver.
 Procedures
The procedure to use varies depending on whether "To Adjust Colors", "To Adjust the Sharpness" or "To
Print a Full-Color Original in Two Colors". Refer to the procedure corresponding to the particular user's
request.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
The areas other than black is printed in the
same color (Red).
Contents
Gradation reproduction priority (The gradation ability of
an original such as a photo becomes more emphasized.)
Text reproduction priority (Text or lines can be printed
more clearly.)
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
3-91
3.Printer-specific Adjustments
After Adjustment
Default
0