To Adjust User Custom Mode Settings In Full Color Mode - Toshiba e-STUDIO2010AC Imaging Manual

2.19.2

To Adjust User Custom Mode Settings in Full Color Mode

• Perform the adjustment in accordance with the procedures below.
• Only the service technician must perform procedures (1) and (2).
• Both the service technician and the user can perform procedure (3).
(1) Select [08 SETTING MODE]. Change the value for the code [7614] to enable the functions of the
User Custom mode in the full color mode.
Value for 08-7614
0
1
2
3
4
5
• The default adjustment value for the User Custom mode is preset at the one that reproduces the
image quality equivalent to that of Text/Photo in the full color mode at the time of shipment.
After setting the value, perform the next procedure.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
User mode for full color mode
Unused
Used (Text/Photo base)
Used (Text base)
Used (Printed Image base)
Used (Photo base)
Used (Map base)
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-83
2.Copier-specific Adjustments