To Copy While Erasing Shadow Outside Of Image - Toshiba e-STUDIO2010AC Imaging Manual

2.Copier-specific Adjustments
2.20

To Copy While Erasing Shadow Outside of Image

Before adjustment
When originals such as books are copied,
an area outside of the image is copied like
a shadow because the original cover is not
fully closed.
 Explanation
When originals such as books are copied, an area outside of the image is copied like a shadow because
the original cover is not fully closed. Use the Outside Erase function to avoid copying areas outside of the
image.
 Procedures
Both the service technician and the user can perform all the steps of this adjustment.
(1) Press [Edit] tab on the Cop and then press [Outside Erase]. Change the border between the original
and areas not belonging to the original by pressing either [+] or [-] as required.
• When you adjust it to [+] side, the area to be detected as that not belonging to the original is
widened. When you adjust it to [-] side, the area to be detected as that not belonging to the
original is narrowed.
<Notes>
The Outside Erase function may not be operated correctly under the following conditions:
• When making copies in a bright room, leaving the DF or the Platen Cover opened (The density of
areas not belonging to the original is lowered due to outside light.)
• When the original has extremely dark areas (The extremely dark areas are wrongly detected as
areas not belonging to the original and thus erased.)
• In case of special originals (e.g. a three-dimensional object, an original with black edges, the
edges of an opened book)
© 2018 TOSHIBA TEC CORPORATION All rights reserved
After adjustment
The shadow is erased.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-88