Toshiba e-STUDIO2010AC Imaging Manual page 330

5.Scanning-specific Adjustments
To scan greenish yellow clearly
Use steps (a) through (c) to perform the adjustment.
(a) Set R (red) to [+] side in Color Balance.
(b) Set G (green) to [-] side in Color Balance.
(c) Set the color balance with a combination of both (a) and (b).
To scan yellow more vividly
Use steps (a) through (c) to perform the adjustment.
(a) Set B (blue) to [-] side in Color Balance.
(b) Set R (red) and G (green) to [+] side in Color Balance.
(c) Set the color balance with a combination of both (a) and (b).
<Note>
• This adjustment influences not only yellow but also other colors.
After adjusting the color balance, copy and check the copy image quality.
 Caution after the adjustment
Nothing in particular.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC © 2018 TOSHIBA TEC CORPORATION All rights reserved
5-24