To Make Solid Filled Bold Text (Logo) Highly Colored - Toshiba e-STUDIO2010AC Imaging Manual

2.Copier-specific Adjustments
2.12

To Make Solid Filled Bold Text (Logo) Highly Colored

Before adjustment
The solid filled graph is not highly colored
enough.
 Explanation
Solid filled bold text, such as a logo, is sometimes not highly colored on the copy. Change the original
mode option, perform copy density adjustment and level adjustment for black headline text, in order to
make the solid filled image more highly colored.
• This adjustment will have an effect only on copying in the Full color mode.
 Procedures
The procedure to use varies, depending on whether to adjust the copy image quality of a black or
colored logo. Refer to the procedure corresponding to the user's particular request.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
After adjustment
The solid filled graph becomes highly
colored and sharper.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
2-54