Toshiba e-STUDIO2010AC Imaging Manual page 327

Color Sub
[05] Code
mode code
0
Full
05-8428 1
color
2
• For further information regarding the codes, refer to the Service Manual.
<Note>
• Select the code for the Custom mode option, in order to adjust the value for [05] code in the
Custom mode. Never adjust any values for [05] code in existing original mode.
After adjusting the value in the Custom mode, perform the next procedure.
(3) When scanning the original, press [SCAN SETTING] on the Control Panel. Select "User Custom"
from among the original mode options.
 Caution after the adjustment
Nothing in particular.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
Acceptable
Adjustment value
range
RGB color
balance
adjustment (R)
RGB color
balance 0 to 255
adjustment (G)
RGB color
balance
adjustment (B)
5-21
5.Scanning-specific Adjustments
Default Setting value
When a larger value is
set, red becomes
darker. When a smaller
value is set, it becomes
lighter.
When a larger value is
set, green becomes
128 darker. When a smaller
value is set, it becomes
lighter.
When a larger value is
set, blue becomes
darker. When a smaller
value is set, it becomes
lighter.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Reference
section
5.10
5.10
5.10