Toshiba e-STUDIO2010AC Imaging Manual page 120

2.Copier-specific Adjustments
(4) Select [05 ADJUSTMENT MODE] and arrange the color balance by changing the setting values for
the codes from [7960] to [7987] to adjust the density for each color.
Original Color to
mode adjust
Y (Yellow)
M (Magenta) 05-7965
Text/Photo
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta) 05-7966
Text
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta) 05-7967
Printed Image
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta) 05-7968
Photo
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta) 05-7969
Map
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta) 05-7981
User Custom
C (Cyan)
K (Black)
Y (Yellow)
M (Magenta) 05-7985
Red Seal
Color
C (Cyan)
K (Black)
• Set the value in increments of approximately 10, while checking the copy image until the optimum
value is obtained.
The value for the code corresponding to the original mode (Text/Photo, Text, or Printed Image) will
affect the copy image quality in the Full color mode and the Auto Color mode.
• The subcode varies according to the area where the density is adjusted. Refer to the table below
and set the subcode for the area to be adjusted.
Subcode
0
1
2
 Caution after the adjustment
Nothing in particular.
© 2018 TOSHIBA TEC CORPORATION All rights reserved
[05] code Subcode
05-7960 0/1/2
0/1/2
05-7970 0/1/2
05-7975 0/1/2
05-7961 0/1/2
0/1/2
05-7971 0/1/2
05-7976 0/1/2
05-7962 0/1/2
0/1/2
05-7972 0/1/2
05-7977 0/1/2
05-7963 0/1/2
0/1/2
05-7973 0/1/2
05-7978 0/1/2
05-7964 0/1/2
0/1/2
05-7974 0/1/2
05-7979 0/1/2
05-7980 0/1/2
0/1/2
05-7982 0/1/2
05-7983 0/1/2
05-7984 0/1/2
0/1/2
05-7986 0/1/2
05-7987 0/1/2
Area where the density is adjusted
Low density area
Middle density area
High density area
2-66
Recommended value
Set a value larger than
128 to increase the
density.
Set a value smaller than
128 to decrease the
density.
e-STUDIO2010AC/2510AC/2515AC/3015AC/3515AC/4515AC/5015AC
Acceptable
Default
value range
0 to 255 128