Transition - RGBlink VENUS X1 User Manual

4. Menu Orientation
MENU
that is, turn the knob, and set the <SPLIT> as ―ON‖, push the knob to
confirm. System default ―OFF‖. User can set the normal split in the sub
menus:
SPLIT: Split function, can choose ―ON‖ or ―OFF‖.
H TOTAL: The total width points of LED display that will split.
V TOTAL: The total height points of LED display that will split.
H POS: The horizontal position of the device when do split.
V POS: The vertical position of the device when do split.
H SIZE: The width of the device when do split.
V SIZE: The height of the device when do split.
ADVANCE: H SIZE, V SIZE, H POS and V POS setting. If image quality
distorts by improper operation, it can be recover by reset.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
For details please refer to the instructions in the manual:

TRANSITION

Push the [MENU] button to go into the menu items, turn the knob button to
select <TRANSITION>, show menus as follows:
DEINTERLACE: Force Deinterlace function, can choose ―ON‖ or ―OFF‖.
ON: Force deinterlace.
OFF: No deinterlace.
IMAGE ENHANCE: Image enhancement function, used for image edge
sharpening, color reduction and image scaling.
MODE: Special effects switching mode.
DISSOLVE: Fade in fade out effects switching.
VENUS X1
Note
User can also push the [SPLIT] button to set up
the SPLIT.
User Manual
Split Setting.
52