RGBlink VENUS X1 User Manual page 47

4. Menu Orientation
MENU
For details, please refer to the instructions in the manual:
Switching.
OUTPUT ADJUST: Output adjust menus, sub menu as follows:
DVI1, setting as following:
DVI1 OUTPUT: Can choose OUTPUT or DVI-LOOP. System default DVI1
port. If do split via DVI LOOP port, it needs to select ―DVI LOOP‖.
DVI MODE: Can set the protocol as HDMI or DVI, default is DVI output,
HDMI signal output will enable when HDMI option checked.
BIT DEPTH: Can set the image bit depth. DVI default 8 bit, user don't need
to set it. HDMI default 10 bit, and can choose 8 bit or 12 bit.
DATE RANGE: DVI1 output range, can set as RGB (graphic mode or
YCbCr (video mode), RGB output scale range is 0~255, YCbCr range is
16~235.
DE ADJUST: DE adjust, sub menu as following:
DE ON/OFF: Can choose to open or close, when choose open, it can be
adjusted to DE, as follows:
H SIZE: Width setting.
V SIZE: Height setting.
H POS: Horizontal phase setting.
V POS: Vertical phase setting.
When the signal source of the screen appear black side, can use this
function to shift the black out of the screen.
RESET: If image quality distorts by improper operation, it can be recover by
reset.
DVI2, the settings include DVI MODE, BIT DEPTH, DATA RANGE, DE
ADJUST and RESET, the settings are same with DVI1.
ASPECT RATIO: Aspect ratio setting, user can choose 4:3, 16:9 and
DEFAULT.
VENUS X1 User Manual
Screen Size
47