Scale Key; Take Key; Transition Setting - RGBlink VENUS X1 Quick Start Manual

Hide thumbs Also See for VENUS X1:

Table of Contents

(2) If select <TEST PATTERN>, push the button, its LED light turns on, the output will be switched to test

pattern. There are 66 kinds of test patterns. If choose <AUTO SWITCH>, VENUS X1 will output all the test

patterns one by one, and the interval between is 1 to10S. Push the button again, its LED light is off, and

output the video image.

(3) If select <BRIGHTNESS>, push the button, its LED light turns on, user can adjust the brightness, contrast,

saturation, sharpness, color red, color green, color blue and gamma. If image quality distorts by improper

operation, it can be recover by reset.

SCALE Key

Zoom function: the default function of the system is zoom . The zoom control will be selected in the zoom

menu,Confirm by lightly touching the knob.

Adjustment function: the image width, height, width/height, horizontal position and vertical can be adjusted by

means of a light knob or directly input digital mode

Position equivalent, adjust to preset value, and then touch the knob to determine.

Refer to the zoom Settings for details.

At this point, the button 0~9 digital button lamp is on, and users can set it through the knob or digital button.

1.The default of system is turn on the button"TAKE"

2. Select the signal that need to take, for example, gently push [DVI/5] button, the signal source button turns

blinking ,and the OLED screen will display the selected TAKE signal source;

. Pressing 5 seconds frequently can be able to cancel the selection of the "TAKE" key.

4.After select the signal, push the [TAKE], and the signal will be taken to the output in the way of special effect.

Push the [MENU] button two times, and enter the effect switch function menus, effect menu shown as follows:

DEINTERLACE: Force Deinterlace function, select "ON" or "OFF".

ON: Force deinterlace.

OFF: No deinterlace.

IMAGE ENHANCE: Image enhancement function, for image edge sharpening, color reduction and image scaling.

MODE: Special effects switching modes, including DISSOLVE, CUT, WIPE SQUARE IN, WIPE SQUARE OUT, WIPE

TOP LEFT IN, WIPE TOP LEFT OUT, WIPE TOP RIGHT IN, WIPE TOP RIGHT OUT, WIPE BOTTOM LEFT IN, WIPE

Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C

Tel: 00865925771197

Email: sales@rgblink.com

Fax: 00865925788216

http://www.rgblink.cn

Table of Contents