Transition Setting; Test Pattern - RGBlink D4 User Manual

3.3.3 Transition Setting

1. Mode: to select the transition mode for for switching. Cut or Fade available.
2. Duration: the duration time of transition. If under Fade Mode, duration time range from 0.0-2.0s

3.3.4 Test Pattern

1. Type: Users can choose OFF to disable test Pattern, or choose any one from the following test
patterns:Pure Color, Color Bar, V Color Bar, Ramp,Red/Blue,Checker,Window,Crosshatch,Slide Bar,
Frame, T 32 Dots, T 64 Dots 5, T64 Dots 3, H Stripe, V Stripe
2. When pure color is chosen, value of Red,Green,Blue shall be set :RGB value for test pattern, each
one range from 0 to 255
TP button on the front panel is the short cut button to open Test Pattern menu.
HDCP 2.X, UHD, 4K, HDR10, HLG, HDMI 2.0, DP 1.2, HDMI 2.1, DP 1.4, 6G SDI, 12G SDI, H.264, H.265
D4
Customize Format:
*3840x2160@60
Width<4096
Mode Cut
Duration Invalid
*Type Color Bar
Red 255
Green 255
Blue 255
User Manual
20