Special Effects Switching - RGBlink VENUS X1 User Manual

6. System Setup and Operation

Special Effects Switching

Special Effects Switching
Push the [MENU] button two times, and enter the effect switch function
menus, effect menu shown as follows:
DEINTERLACE: Force Deinterlace function, can choose ―ON‖ or ―OFF‖.
ON: Force deinterlace.
OFF: No deinterlace.
IMAGE ENHANCE: Image enhancement function, used for image edge
sharpening, color reduction and image scaling.
MODE: Special effects switching modes, including DISSOLVE, CUT, WIPE
SOUARE IN, WIPE SOUARE OUT, WIPE TOP LIEFT IN, WIPE TOP
LIEFT OUT, WIPE TOP RIGHT IN, WIPE TOP RIGHT OUT, WIPE
BOTTOM LEFT IN, WIPE BOTTOM LEFT OUT, WIPE BOTTOM RIGHT IN,
WIPE BOTTOM LEFT OUT, WIPE LEFT IN, WIPE LEFT OUT, WIPE
RIGHT IN, WIPE RIGHT OUT, WIPE TOP IN, WIPE TOP OUT, WIPE
BOTTOM IN and WIPE BOTTOM OUT:
FADE TIME: Switch time setting. Turn the knob to choose the time and
push the knob to confirm. The switching time ranges from 0 to 3S.
ALPHA: It can set the image transparency, the regulating range is among
0 to 16.
VENUS X1
->DEINTERLACE
IMAGE ENHANCE
MODE
FADE TIME
->ALPHA
User Manual
ON
OFF
DISSOLVE
0.5s
16
126