Table of Contents
Advertisement
Transition Setting
Push the [MENU] button for two times, and enter to the transition function menus, transition menu shown as
follows:
DEINTERLACE: Force Deinterlace function, select "ON" or "OFF".
ON: Force deinterlace.
OFF: No deinterlace.
IMAGE ENHANCE: Image enhancement function, for image edge sharpening, color reduction and image scaling.
MODE: Special effects switching modes, including DISSOLVE, CUT, WIPE SQUARE IN, WIPE SQUARE OUT, WIPE
TOP LEFT IN, WIPE TOP LEFT OUT, WIPE TOP RIGHT IN, WIPE TOP RIGHT OUT, WIPE BOTTOM LEFT IN, WIPE
BOTTOM LEFT OUT, WIPE BOTTOM RIGHT IN, WIPE BOTTOM LEFT OUT, WIPE LEFT IN, WIPE LEFT OUT, WIPE
RIGHT IN, WIPE RIGHT OUT, WIPE TOP IN, WIPE TOP OUT, WIPE BOTTOM IN and WIPE BOTTOM OUT.
PULL SCREEN: Enable or disable pull screen function.
FADE TIME: Switch time setting. Turn the rotary knob to select the fade time and push the knob to confirm. The
switching time ranges from 0 to 3S.
ALPHA: Set the image transparency, the adjustment range is 0 to 16.
Address：S603-604 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
->DEINTERLACE
IMAGE ENHANCE
MODE
PULL SCREEN
->FADE TIME
ALPHA
ON
OFF
DISSOLVE
OFF
0.5s
16
27
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn
Advertisement
Table of Contents
