Transition; Audio - RGBlink GX4 Quick Start Manual

Transition

Transition is used to set the switching mode between different input sources.
MODE：Special effects switching modes, including FADE, CUT, WIPE SOUARE IN, WIPE SOUARE OUT, WIPE TOP
LIEFT IN, WIPE TOP LIEFT OUT, WIPE TOP RIGHT IN, WIPE TOP RIGHT OUT, WIPE BOTTOM LEFT IN, WIPE
BOTTOM LEFT OUT, WIPE BOTTOM RIGHT IN, WIPE BOTTOM LEFT OUT, WIPE LEFT IN, WIPE LEFT OUT, WIPE
RIGHT IN, WIPE RIGHT OUT, WIPE TOP IN, WIPE TOP OUT, WIPE BOTTOM IN and WIPE BOTTOM OUT
DURATION:set the transition time ranging from 0.0 to 1.0 S
ALPHA:set the image transparency ranging from 0 to 16
DEINTERLACE:select ON or OFF to enable or shut down the deinterlacing function
IMAGE ENHANCE:image enhancement function, for image edge sharpening, color reduction and image scaling.
TAKE: Select ON or keep pressing 【TAKE】button 3s to enable the function. The selected input signal will be
switched to output as the TRANSITION set.

Audio

MUTE:select ON or OFF
Volume:adjustment range from 0 to 100
Users can also adjust volume without entering AUDIO menu. Rotate the knob anytime the LCD screen shows the
main interface.
AUDIO IN:select the source of the input audio from IMAGE A or IMAGE B
HDMI:select internal or external audio for HMDI input
© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 592 5771197 |
>MODE FADE
DURATION 0.5S
ALPHA
DEINTERLACE
IMAGE EHANCE OFF
>MUTE
VOLUME
AUDIO IN
HDMI
support@rgblink.com
>TAKE
16
ON
OFF
59
IMAGE A
INTERNAL
| www.rgblink.com
ON
17 / 32