RGBlink VENUS X1 User Manual page 107

6. System Setup and Operation
Set LED Display Connection
(11) Turn the knob, and choose <X>, set X as 360 (Note: X=HORIZONTAL CARD×WIDTH,
in the previous part, we set horizontal card as 3 and width as 120). Shown as follows:
(12) Same as above, set X of Port D of No.2 sending card as 360. Then connect the Port
D and Port U of Two Sending Cards to LED Screen is finished.
Rendering is as follows:
VENUS X1
->X
Y
SAVE TO SENDER CARD
RESET
->X
Y
SAVE TO SENDER CARD
RESET
User Manual
0
0
360
0
107