Using Take Mode - RGBlink VENUS X1 User Manual

6. System Setup and Operation

Using TAKE Mode

Using TAKE Mode
1. First, define the [SCALE] key as TAKE. For more details, please refer to:
User Define the SCALE
2. After define SCALE key as TAKE, the SCALE button will light up.
3. Choose the signal that need to take, for example, push [DVI/5], the
signal button you have selected will flash and the main menu will show
the TAKE source you have selected.
4. After choose the signal, push the [SCALE] ([TAKE]) button, and the
signal will be taken to the output.
VENUS X1
Key.
User Manual 125