1. Manuals
  2. Brands
  3. RGBlink Manuals
  4. Media Converter
  5. X3p
  6. Quick start manual

RGBlink X3p Quick Start Manual

Hide thumbs Also See for X3p:
Table of Contents

Advertisement

Quick Links

Download this manual
X3p
Quick Start
Optional Dual Preview Streaming Module
HDR Compatible
Modular Design throughout for input and output
Hot swap input and output modules
4K@60 inputs compatible including HDMI 2.0,
DisplayPort1.2
Up to 12G-SDI Input option
Preview 16 inputs
4K/2K EDID Management
Multiple operation modes
Support for 3D signal input and output
Control via XPOSE and T series consoles
Redundant hot swap PSU option

Advertisement

Table of Contents
loading

Related Manuals for RGBlink X3p

Summary of Contents for RGBlink X3p

  • Page 1 Quick Start Optional Dual Preview Streaming Module  HDR Compatible  Modular Design throughout for input and output  Hot swap input and output modules  4K@60 inputs compatible including HDMI 2.0,  DisplayPort1.2 Up to 12G-SDI Input option  Preview 16 inputs ...

  • Page 2: Table Of Contents

    Connect with the device........................10 Output Settings............................13 Operation Mode............................18 Input Settings............................39 Access Control............................43 System Settings............................45 Slave Unit..............................48 Contact Information..............................50 © Xiamen RGBlink Science & Technology Co., Ltd. 1 / 51 Ph: +86 592 5771197 | support@rgblink.com www.rgblink.com...

  • Page 3: Product Introduction

    4k display management system, X3 offers a variety of product form options and multiple operating modes. X3p is the X3 2019 version, which comes with the preview of all input sources with optional PVW modules.X3p is the X3 2019 version, which comes with the preview of all input sources with optional PVW modules.

  • Page 4: Packing Configuration

    Antistatic Bag Note: Chinese Standard, American Standard or European Standard power cord is optional. The color of the screw driver is randomly offered. © Xiamen RGBlink Science & Technology Co., Ltd. 3 / 51 Ph: +86 592 5771197 | support@rgblink.com...

  • Page 5: Hardware Orientation

    ; long push the button, the OLED will pop up a confirm box, release the power button, push the power again before the confirm box disappears, and the power can be turned off. © Xiamen RGBlink Science & Technology Co., Ltd. 4 / 51 Ph: +86 592 5771197 | support@rgblink.com...

  • Page 6: Back Panel

    Control and Communication DVI, VGA, HDMI, SDI,USB, CVBS, 4K@30Hz and 4K@60Hz optiona connectors modules Dedicated slots for PVW modules Power switch 2 Modular power © Xiamen RGBlink Science & Technology Co., Ltd. 5 / 51 Ph: +86 592 5771197 | support@rgblink.com www.rgblink.com...

  • Page 7: Xpose Operation

    Installer Language box, select the language, for example, select “English”, and click “OK” to confirm. Click “Next” to install: Select “Browse...” to select the XPOSE software install location: © Xiamen RGBlink Science & Technology Co., Ltd. 6 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 8 XPOSE to disk C if the system is Windows 7 or above. Click “Install”: Click “Finish” and is ready to run the XPOSE management software: © Xiamen RGBlink Science & Technology Co., Ltd. 7 / 51 Ph: +86 592 5771197 | support@rgblink.com...

  • Page 9: Xpose Operation

    Log in interface will be enter after opening, the user name is Admin, and there is no password, select “VENUS X3”, and enter into the software by clicking “Login”. © Xiamen RGBlink Science & Technology Co., Ltd. 8 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 10 XPOSE management software contains items including:Search, Output Settings, Operation Mode, Admin and System Settings, Slave Unit, Log out. In the following parts, we will introduce these in detail. © Xiamen RGBlink Science & Technology Co., Ltd. 9 / 51 Ph: +86 592 5771197 | support@rgblink.com...

  • Page 11: Connect With The Device

    Then, click the shortcut “Search” on the operation interface. Then it will search the X3, and show the device name, device number and IP after search, as shown in the figure below: © Xiamen RGBlink Science & Technology Co., Ltd. 10 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 12 X3 are searched. If select “Clean Tag Name”, the modified tag name will be cleared. The software will automatically synchronize after connection, as shown in the figure below: © Xiamen RGBlink Science & Technology Co., Ltd. 11 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 13 © Xiamen RGBlink Science & Technology Co., Ltd. 12 / 51 Ph: +86 592 5771197 | support@rgblink.com www.rgblink.com...

  • Page 14: Output Settings

    Click the “Output Settings”, and enter the interface as follows: Output Setting, DE Setting, Test pattern and OSD are included in output settings, specific as: © Xiamen RGBlink Science & Technology Co., Ltd. 13 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 15 If select “ON”, the output resolution will be same with the resolution that selected or customized above. HDMI or BNC can be selected in “Input Source” by sliding the switch. © Xiamen RGBlink Science & Technology Co., Ltd. 14 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 16 De Switch: Enable or disable the De function by sliding the De Switch. De Setting: The settings for De include X, Y, width, height, line polarity and scene polarity. © Xiamen RGBlink Science & Technology Co., Ltd. 15 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 17 Output: User can select any board among the four boards. Color Choice: Signal source, color bar and pure color can be selected. #FFFFFF: Preview the corresponding RGB values and the color. © Xiamen RGBlink Science & Technology Co., Ltd. 16 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 18 Scrolling Speed: The scrolling speed can be set, and the adjustment range is between 1~16. OSD Scroll: Can select no scroll, left scroll and right scroll. Click “Save” and then click “Apply” to confirm after setting. © Xiamen RGBlink Science & Technology Co., Ltd. 17 / 51 Ph: +86 592 5771197 | support@rgblink.com...

  • Page 19: Operation Mode

    Fade Mode, Videowall Mode, Matrix Mode, Preview Mode, Link Mode and 3D-Mode are included in operation mode. In field application, Videowall and Preview are more often used than other modes, specific as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 18 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 20 “...” after each input format for the following settings: LOGO: Right click HDMI/DVI input, and select “LOGO”, it will enter to the LOGO menu items. © Xiamen RGBlink Science & Technology Co., Ltd. 19 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 21 Change Name: Select “New Name”, and input the new name, click “OK” after setting. Set Input Property: Right click the input and select “Set Input Property”, it will enter to the interface as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 20 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 22 USB Player: Right click the USB input, and select “USB Player”, it will enter to the USB Player interface, including movie and picture, default play the USB movie. © Xiamen RGBlink Science & Technology Co., Ltd. 21 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 23 4K@60 Setting: Right click “...” after 4K module input format, then it will show as follows: Basic: Show the 4K module input resolution. Property: Click”Property”, then pop up window as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 22 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 24 CT_SRGB, CT_USER. If select CT_USER, users can set the parameter of Red, Green and Blue ranging from 0 to 100. 4K: Click “Signal 4”(4K signal connected), then pop up the window as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 23 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 25 Equal Type: Users can custom the H total, V total, row and column, for example, set H total as 7680, V total as 2160, Row as 2 and Column as 4, as shown in the figure below: © Xiamen RGBlink Science & Technology Co., Ltd. 24 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 26 5760, V total as 2160, Row as 2 and Column as 4, as shown in the figure below: Click “OK”, it will pop up windows as below: © Xiamen RGBlink Science & Technology Co., Ltd. 25 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 27 LCD Type: Slide the monitor type switch, and select “LCD Type”. Besides H total, V total, row and column, users can custom the top border, bottom border, left border and right border in LCD type, as shown in the figure below: © Xiamen RGBlink Science & Technology Co., Ltd. 26 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 28 200 automatically. For example, set the top border, bottom border, left border and right border as 100, as shown in the figure below: © Xiamen RGBlink Science & Technology Co., Ltd. 27 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 29 Click this monitor, then press button C and don’t let go, select the monitor that will set, the size of the selected monitor will be changed to the same size of monitor 1, as shown in the figure below: © Xiamen RGBlink Science & Technology Co., Ltd. 28 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 30 “ ” to close all layers. © Xiamen RGBlink Science & Technology Co., Ltd. 29 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 31 Alpha: Set the alpha, the adjustment range is 0~128. Sharpness: Set the sharpness, the adjustment range is 0~100. Brightness: Set the brightness, the adjustment range is 0~100. © Xiamen RGBlink Science & Technology Co., Ltd. 30 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 32 User can preview the layer layout more directly, and switch it to the program output. EDID Click the EDID shortcut “ ”, and pop-up window as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 31 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 33 Click the input port, and set the width, height and frequency. Click “Set” after setting. Select “Reset”, all the setting will be recover to factory setting. Loop Click the loop shortcut “ ”, and pop-up window as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 32 / 51 Ph: +86 592 5771197 | support@rgblink.com www.rgblink.com...
  • Page 34 ”, user can save the data to the computer. Factory Reset Click the factory reset shortcut “ ” to reset to factory settings. Out Card Set © Xiamen RGBlink Science & Technology Co., Ltd. 33 / 51 Ph: +86 592 5771197 | support@rgblink.com www.rgblink.com...
  • Page 35 Click any output, and pop-up window as follows: X, Y, width, height, rotate can be set. Click “Advanced Setting”, pop-up window as follow: © Xiamen RGBlink Science & Technology Co., Ltd. 34 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 36 If users need to connect to the LED display, or there is deviation in splitting, enter to the advanced setting, and scale or crop the image. Page Set Click the shortcut “ ”, and pop-up window as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 35 / 51 Ph: +86 592 5771197 | support@rgblink.com www.rgblink.com...
  • Page 37 Load Page: The button light on is the saved scene, and can be loaded. Short Key Click the shortcut “ ”, and pop-up window as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 36 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 38 Click the “Preview Mode”, and pop-up window as follows: Click “OK”, and the system will synchronize the data, about 5 seconds later, it will enter the interface as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 37 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 39 LED display. If select “Auto Take ON” or “Black Scene ON”, the preview image will seamless switch or black to LED display instantaneously. Default outputs 2.4.6.8 as preview channel and outputs1.3.5.7 as program channel. © Xiamen RGBlink Science & Technology Co., Ltd. 38 / 51 Ph: +86 592 5771197 | support@rgblink.com...

  • Page 40: Input Settings

    DSK settings, source backup, source merge, 4K input set and H264 Input Settings are included in input settings, specific as follows: DSK Settings Click the “DSK Settings”, and pop up window as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 39 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 41 . Users can select the number of source from 2 to 6. It will switch to the backup signal if the signal is interrupted. © Xiamen RGBlink Science & Technology Co., Ltd. 40 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 42 4. If select PIP, users need to select main source and sub source from DUAL DVI, HDMI 1.4, HDMI 2.0 and DP 1.2. 5. Click “Set” after select the working mode. © Xiamen RGBlink Science & Technology Co., Ltd. 41 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 43 IP Set: If select “IP Set”, users can set IP Adress, Netmask, Gateway, DNS and Mac. Network URL Set: If select”Network URL Set”, users can select “One Window”, “Four Windows”, and “Eight Windows”, then set Network URL separately. © Xiamen RGBlink Science & Technology Co., Ltd. 42 / 51 Ph: +86 592 5771197 | support@rgblink.com...

  • Page 44: Access Control

    Access Control Click the “Access Control”, and enter the interface as follows: Role Management Click the “Role Management”, and pop-up window as follows: © Xiamen RGBlink Science & Technology Co., Ltd. 43 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 45 Admin users can manage all the users user, except the admin users. Users can not mange all the users, including admin user and users user. © Xiamen RGBlink Science & Technology Co., Ltd. 44 / 51 Ph: +86 592 5771197 | support@rgblink.com...

  • Page 46: System Settings

    Click the “Connect Setting”, and pop up window as follows: Select the serial connect and net connect, the software will search all the devices if not select “Search by this configuration”. © Xiamen RGBlink Science & Technology Co., Ltd. 45 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 47 Click the “Factory Reset”, and pop up window as follows: Select “Remove the LOGO”, and click “OK”, the LOGO will be removed. Select “Remove EDID”, and click “OK”, the EDID will be removed. © Xiamen RGBlink Science & Technology Co., Ltd. 46 / 51 Ph: +86 592 5771197 | support@rgblink.com...
  • Page 48 If VENUS X3 EXPRESS connects with other devices, users can set the number of device and refresh com. © Xiamen RGBlink Science & Technology Co., Ltd. 47 / 51 Ph: +86 592 5771197 | support@rgblink.com...

  • Page 49: Slave Unit

    Click the “Slave Unit”, and enter the interface as follows: If need more X3p devices to be backup, connect all X3p devices into one router, Users can type in the Device Numbers and Set Numbers, then it will pop up the following window:...
  • Page 50 © Xiamen RGBlink Science & Technology Co., Ltd. 49 / 51 Ph: +86 592 5771197 | support@rgblink.com www.rgblink.com...

  • Page 51: Contact Information

    Warranties are effective upon delivery date to customer and are non-transferable. RGBlink warranties are only valid to the original purchase/owner. Warranty related repairs include parts and labor, but do not include faults resulting from user negligence, special modification, lighting strikes, abuse(drop/crush), and/or other unusual damages.

Table of Contents