RGBlink VENUS X1 User Manual page 95

5. Communication Software Control Guide
How to Connect Windows Control Program by LAN Interface
The fifth step: Open windows control software, click
Interface display as below:
Select [Ethernet]:
Input equipment IP address, click [OK].
Click
corner of the control software interface) is green, and log outputs
information smoothly, then you would control the device through PC
software.
VENUS X1
properties, select Internet protocol (TCP/IP),
then click properties,
revise the equipment IP address to the same
band with that of computer 192.168.0.XXX.
to open the serial port, if the [Comm] button (in the lower-right
User Manual
,
. Now we can
icon,
95