Screen Size Setting - RGBlink VENUS X1 User Manual

6. System Setup and Operation

Screen Size Setting

Screen Size Setting
VENUS X1 supports the screen parameters to meet the requirement where
user want to switch between scale screen size and full display size (like
monitor). This is only enable for a single display window. Following is an
example of a screen size is1408 x 832.
Operator can defined the VENUS X1 output resolution from standard
output resolution list or customized the output resolution which is higher
than 1408 x 832. For this application 1440x900 is an example:
Push the [MENU] button to go into the main menu, turn the knob and
choose <OUTPUT>, push the knob to confirm, turn the knob to choose
<SCREEN PARAMETERS>, push the knob and goes into the SCREEN
PARAMETERS menus as following:
H SIZE--Horizontal pixels, turn the knob or use the digital button to input
the value1408.
V SIZE--Vertical pixels, turn the knob or use the digital button to input the
value 832.
H POS--Horizontal position, default value is 0, set the value as the way of H
SIZE and V SIZE.
V POS--Vertical position, default value is 0, set the value as the way of H
SIZE and V SIZE.
MODE-- Mode option, choose SCREEN SIZE.
SCREEN FOLLOW SCALE--User can enable or disable this function.
When choose ―ON‖, the size of the screen will change according to scale
setting
RESET: If image quality distorts by improper operation, it can be recover
by reset.
VENUS X1 User Manual 115