RGBlink VENUS X1 User Manual page 119

6. System Setup and Operation
Text Overlay Setting
5. Choose the VGA image in ―IMAGE B‖ in <SELECT> option by pushing
<PIP/DSK> button, and push [SCALE] button to adjust the size and
position of VGA image, then set the VGA image to the required position.
The standard position and size is: ensure the VGA image overlay on the
DVI image, display normally and without black edges. If there are black
edges around VGA image, choose <ZOOM> option in <INPUT> to
adjust.
6. Set the text overlay mode: choose <PRESET> option in <TEXT
OVERLAY>, push the knob to enter into the <PRESET> menu items.
Turn the knob to choose the preset mode, for example, set the VGA text
as WhOnBk, choose WhOnBk1 or WhOnBk2 (Note: Text Overlay only
support monochrome subtitles), user can also adjust the <BLEND
MODE> or <BLEND LEVEL> to get a better effect.
7. Push the [SAVE/1] button to save the above parameters.
VENUS X1
->H SIZE
V SIZE
H/V SIZE
H POS
->V POS
RESET
TEXT OVERLAY
->PRESET
BLEND MODE
BLEND LEVEL
User Manual
1920
1080
0
0
0
ON
WhOnBk2
MODE1
0
119