Save The Parameter - RGBlink VENUS X1 User Manual

6. System Setup and Operation

Save the Parameter

Save the Parameter
VENUS X1 provides 36 save preferences, operations are as follows:
1. Push the [SAVE/1] button, the button light is on, and enable the SAVE
function.
2. Turn the knob, and choose the position that will save, push the knob to
confirm.
3. The figure: 1, 2, 3, 4, 5, 6, 7, 8, 9, 0 down of the buttons means
SAVE1~10, user can push any button on to save. For example, save to
SAVE 2, push button 2, the OLED panel will show as follows after
saving.
4. Push the [SAVE/1] button again, the button light is off, and disable the
SAVE function.
VENUS X1
SAVE TO
->SAVE 1
Button is on can be saved
Button flashes will be overwrite
SAVE TO
->SAVE 2 FINISHED!
Button is on can be saved
Button flashes will be overwrite
User Manual 132