Split Setting - RGBlink VENUS X1 User Manual

6. System Setup and Operation

Split Setting

Split Setting
SPLIT is used when multiple VENUS X1 are used in cascade mode. When
do cascade, connect the signals to the signal distributor first, then connect
from the outputs of the signal distributor to each input of VENUS X1. User
can also do cascade via DVI LOOP port, and it needs to select ―DVI LOOP‖
for <DVI1 OUTPUT> in menus.
The operations are as follows:
Push the [SPLIT] button, the button LED light will turn on, and enter the
split function menus. Turn the knob to choose the split mode, there are two
split modes, fixed split and normal split, the OLED module show as follows:
FIXED SPLIT: Menus are as follows:
SPLIT: Split function, can choose ―ON‖ or ―OFF‖. System default ―OFF‖.
HORIZONTAL SPLIT: Horizontal fixed split, choose it and push the number
button to set the total horizontal screen number.
VERTICAL SPLIT: Vertical fixed split, choose it and push the number
button to set the total vertical screen number.
SPLIT INDEX: Use can choose the split index, and the LED screen will
show the corresponding image.
VENUS X1
->FIXED SPLIT
NORMAL SPLIT
->SPLIT
HORIZONTAL SPLIT
VERTICAL SPLIT
SPLIT INDEX
->H SIZE
V SIZE
ADVANCE
User Manual
>>
>>
OFF
1
1
1
1920
1080
>>
110