Transition Setting; Audio - RGBlink VSP268S Quick Start Manual

Transition Setting

Touch [Menu[ and enter to the menu, rotate the knob, select <Effect Switch> and enter to the menu, now, it is the
effect setting and user can set the switch effect mode as follows:
MODE: The transition modes includs cut, fade in and fade out, POP L+T, PUSH L+T, POP R+T, PUSH R+T,
POP L+B, PUSH L+B, POP R+B, PUSH R+B, POP CENT, PUSH CENT, POP LEFT, PUSH LEFT, POP
RIGHT, PUSH RIGHT, POP TOP, PUSH TOP, POP BOTTOM and PUSH BOTTOM.
DURATION: Rotate the knob to set the switching duration, touch the knob to select the switching duration with
range from 0 to 1 second.
ALPHA: It is for setting the transparancy of the image display with the range from 0 to 16.
DEINTERLACE: User can select "On" or "Off".
Turn on the deinterlace, the input signal will be deinterlaced and the switch effect will not be affected.
Turn off the Deinterlace, the input signal will not be deinterlaced.
IMAGE ENHANCE: It is for sharpnesss of edge of image, color restore and image scale, user can choose "On"
or "Off".
TALE: Select "On" or "Off", or press <Switch> button 3s to open the switch feature, the signal will switch to
the output.

AUDIO

Press [AUDIO] for audio set up.
MUTE: ON or OFF.
VOLUME: 0-100.
AUDIO IN: To select audio source from [IMAGE A] or [IMAGE B].
HDMI:When use HDMI input, can select [INTERNAL] or [EXTERNAL] audio source.
14
Address：S601-607, S504 Weiye Building Torch Hi-Tech Industrial Development Zone Xiamen, Fujian Province, P.R.C
Tel: 00865925771197
Email: sales@rgblink.com
Fax: 00865925788216
http://www.rgblink.cn