RGBlink VENUS X1 User Manual page 59

4. Menu Orientation
MENU
H SIZE: Set the width.
V SIZE: Set the height.
SAVE TO SENDER CARD: Save the parameters to sender card after
setting.
BRIGHTNESS: The brightness adjustment range is between 1%~100%.
RECEIVING CARD: Including the following settings:
CHOOSE CABLE: User can choose Port A or Port B (Port A or Port B is
for Colorlight, and Port D or Port U is for Linsn).
HORIZONTAL CARD: Set the horizontal card.
VERTICAL CARD: Set the vertical card.
WIDTH: Set the width.
HEIGHT: Set the height.
Offset (A/B) X: Set offset (A/B) X.
Offset (A/B) Y: Set offset (A/B) Y.
CONNECT CARD TYPE: There are 8 kinds of connection mode currently.
Send to receiver after setting.
SEND TO RECEIVER: Save to receiver after setting.
BRIGHTNESS: The brightness adjustment range is between 1%~100%.
ADVANCED: Including the following settings:
RECEIVING CARD SEPARATE: Including the following settings:
CHOOSE CABLE: User can choose PORT A or PORT B (PORT A or
PORT B is for Colorlight, and PORT D or PORT U is for Linsn).
RECEIVING CARD NO.: Choose the number of receiving card that to be
set.
X: Set the start point X.
Y: Set the start point Y.
SEND TO RECEIVER: Send to receiver after setting.
COLOR TEMP: User can set color red, color green, color blue, and save to
sender card.
VENUS X1 User Manual 59