Transition; Audio; Split - RGBlink GX4 User Manual

3.3.4 Transition

Transition is used to set the switching mode between different input sources.
MODE：Special effects switching modes, including FADE, CUT, WIPE SOUARE IN, WIPE SOUARE OUT, WIPE TOP LIEFT IN,
WIPE TOP LIEFT OUT, WIPE TOP RIGHT IN, WIPE TOP RIGHT OUT, WIPE BOTTOM LEFT IN, WIPE BOTTOM LEFT OUT, WIPE
BOTTOM RIGHT IN, WIPE BOTTOM LEFT OUT, WIPE LEFT IN, WIPE LEFT OUT, WIPE RIGHT IN, WIPE RIGHT OUT, WIPE TOP
IN, WIPE TOP OUT, WIPE BOTTOM IN and WIPE BOTTOM OUT
DURATION:set the transition time ranging from 0.0 to 1.0 S
ALPHA:set the image transparency ranging from 0 to 16
DEINTERLACE:select ON or OFF to enable or shut down the deinterlacing function
IMAGE ENHANCE:image enhancement function, for image edge sharpening, color reduction and image scaling.
TAKE: Select ON or keep pressing 【TAKE】button 3s to enable the function. The selected input signal will be switched to
output as the TRANSITION set.

3.3.5 Audio

MUTE:select ON or OFF
Volume:adjustment range from 0 to 100
Users can also adjust volume without entering AUDIO menu. Rotate the knob anytime the LCD screen shows the main
interface.
AUDIO IN:select the source of the input audio from IMAGE A or IMAGE B
HDMI:select internal or external audio for HMDI input

3.3.6 Split

GX4 can be used in multiple cascade mode to finish split. When do cascade, connect the signals to the signal distributor
first, and then connect from the outputs of the signal distributor to each input of GX4. User can also do cascade via HDMI
LOOP port.
GX4 User Manual
>MODE
DURATION
ALPHA
DEINTERLACE
IMAGE EHANCE
>TAKE
>MUTE
VOLUME
AUDIO IN
HDMI
>SPLIT ON
H TOTAL 1920
V TOTAL 1080 H POS
FADE
0.5S
16
ON
OFF
ON
OFF
59
IMAGE A
INTERNAL
0
23