Optional Module Installation And; Replacement Instruction - RGBlink VENUS X1 User Manual

ptional Module Installation and
D. O
Replacement
VENUS X1 is based on replaceable input optional modules structure, user can install
or replace the optional module according to actual need, specific steps are as follows:
Install the Optional Module
1. Unscrew the 2 captive screws in input modules block, and pull out the input module
block, as shown in figure:
2. Fix the input EXT board and input modules on the plate with the fixed screws, as
shown in figure:
VENUS X1
Instruction
User Manual
Captive Screw
149