Transition; Audio - RGBlink GX4pro User Manual

COLOR:WHITE, BLUE, GREEN, RED.
SOLID COLOR
RED,GREEN,BLUE: value 0-255
9. GAMMA
LINEAR,sRGB, -1.2, 1.2, -1.4, 1.4, -1.6, 1.6

3.3.5 Transition

Transition is used to set the switching mode between different input sources.
MODE: Special effects switching modes, including FADE, CUT, WIPE SOUARE IN, WIPE SOUARE OUT, WIPE TOP
LIEFT IN, WIPE TOP LIEFT OUT, WIPE TOP RIGHT IN, WIPE TOP RIGHT OUT, WIPE BOTTOM LEFT IN, WIPE BOTTOM
LEFT OUT, WIPE BOTTOM RIGHT IN, WIPE BOTTOM LEFT OUT, WIPE LEFT IN, WIPE LEFT OUT, WIPE RIGHT IN,
WIPE RIGHT OUT, WIPE TOP IN, WIPE TOP OUT, WIPE BOTTOM IN and WIPE BOTTOM OUT
DURATION:set the transition time ranging from 0.0 to 1.0 S
ALPHA:set the image transparency ranging from 0 to 16
DEINTERLACE:select ON or OFF to enable or shut down the deinterlacing function
IMAGE ENHANCE:image enhancement function, for image edge sharpening, color reduction and image scaling.
TAKE: Select ON or keep pressing 【 TAKE】 button 3s to enable the function. The selected input signal will be
switched to output as the TRANSITION set.

3.3.6 Audio

© Xiamen RGBlink Science & Technology Co., Ltd.
Ph: +86 0592 5771197 | support@rgblink.com | www.rgblink.com
COLOR
RED
GREEN
BLUE
>MODE
DURATION
ALPHA
DEINTERLACE
IMAGE EHANCE
>TAKE
>MUTE
VOLUME
AUDIO IN
HDMI
255
255
255
FADE
0.5S
16
ON
OFF
ON
OFF
59
IMAGE A
INTERNAL
23