RGBlink VENUS X1 User Manual page 105

6. System Setup and Operation
Set LED Display Connection
3. Connect the Port D and Port U of Two Sending Cards to LED Screen
(1) First, make sure the device is in normal operation.
(2) Choose the input source, for example, DVI.
(3) Connect four cables to Port U1, Port D1, Port U2 and Port D2 respectively.
(4) Connect Port D1 and Port U1 of No.1 Sending Card to LED screen, the settings are
same as ―Connect the Port D and Port U of One Sending Card to LED Screen‖.
(5) Same as above, connect Port D2 and Port U2 of No.2 Sending Card to LED screen.
(6) Turn the knob, and select <LED MANAGEMENT>:
(7) Turn the knob, choose <SENDING CARD NO.> in <QUICK CONNECTION> option,
push the knob to confirm. Turn the knob, choose No.2, push the knob to confirm.
Shown as follows:
VENUS X1
SYSTEM
->LED MANAGEMENT
LANGUAGE/语言
FACTORY RESET
->QUICK CONNECTION
ADVANCED
SENDING CARD TYPE
->SENDING CARD NO.
OUTPUT FORMAT
QUICK CONNECTION
User Manual
>>
>>
ENG
>>
>>
>>
LINSN
No.2
>>
>>
105