GE Vivid 3 Pro Service Manual page 70

GE M S
EDICAL YSTEMS
D 2300164-100, R
IRECTION
12) Remove the two monitor foam supports (item 12 in
13) Remove the three silica gel (moisture absorbing) bags (item 5 in
the unit.
14) Raise the control console (monitor) by pressing the release grip located under the unit's front handle.
15) Remove the two cartons containing the external cables and accessories located under the control
console, and then lower the control console.
16) Lay the top cover (removed from the crate in
narrow side of the base, in front of the unit, to act as a ramp (item 3 in
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
7
EVISION
Figure 3-4 Antistatic Cover, Supports and Accessories
Figure 3-5 Removing the Unit from the Wooden Crate
Chapter 3 - Installation
V ™ 3 P /V
IVID RO
Figure 3-4), located one on each side of the monitor.
Figure
step 8 on page 3-6) on the floor and push it over the
Figure 3-5
™ 3 S M
IVID ERVICE ANUAL
3-4, above) located under
below).
3-7