GE Vivid 3 Pro Service Manual page 150

GE M S
EDICAL YSTEMS
D 2300164-100, R
IRECTION
4-3-4-5 Plug and Scan Test
Table 4-17
Press the On/Off button on the control console for no
1
more than 3 seconds.
2
Turn OFF the system's circuit breaker.
Turn ON the system's circuit breaker.
3
Press the On/Off Button.
Turn OFF the system's circuit breaker. Turn ON the
4
system's circuit breaker after entering to Standby mode.
Turn OFF the system's circuit breaker.
5
Press the On/Off button.
4-10
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
7
EVISION
Plug and Scan Test
Task
Section 4-3 - Functional Check
V ™ 3 P /V ™ 3 S
IVID RO IVID
Expected Result(s)
The system enters Standby mode.
The system remains in Standby mode, indicated by the
blinking On/Off button LED.
The system returns quickly to the Power-ON state -less
than 30 seconds.
The system enters Standby mode and stays in this
mode. The On/Off button LED is blinking.
The system enters the Power-OFF state. The On/Off
button LED is OFF.
M
ERVICE ANUAL